a. After the fish enters the water and swims for 10 seconds, the light flashes to indicate the temperature range.
b. When the fish flashes the blue light, it indicates that the water temperature is <37℃, which is too low.
c. When the green light of the fish is always on, the temperature is 37℃~39℃, which is suitable for bathing.
d. When the fish flashes the red light, it indicates that the water temperature is higher than 39℃, the water temperature is ≥39℃, and the water temperature is too high.
e. When the fish flashes the red, blue and green lights in sequence, the three lights flash in sequence within one second, indicating that the water temperature is higher than or equal to 50℃, which is too high (exceeding the temperature that the fish can withstand).
f. The fish stops for 5 seconds after swimming for every 10 seconds, stops for 2 minutes after 10 minutes, and then stops swimming for 10 minutes. If you need to continue swimming, take the fish out of the water and put it back in, and cycle until the battery is exhausted.
g. The fish swims in slow, medium and fast cycles in water temperatures below 37℃, swims at medium speed in water temperatures between 37℃ and 39℃ (37℃≤water temperature<39℃), and swims at fast speed in water temperatures above 39℃.
2). Battery charging:
When the red light is on to indicate low battery or it has been stored for a long time without use, it should be charged in time to replenish the power. When charging, first open the waterproof rubber plug at the mouth of the fish, and then charge it with the Type-C charging plug. When the light turns green, it means that the charge is full, then unplug the plug and cover the waterproof rubber plug.
Notes: 1). Please handle this fish with care when using it, do not tear it hard or hit it with gravity, or drop it from a high position to avoid damaging the internal parts. 2). Please wipe it dry before storing it after use. 3). Do not place it in water with a temperature higher than 50 degrees for a long time (when the red, blue and green lights flash in sequence) to avoid excessive expansion and rupture of the soft gel. 4). Do not let young children use the product alone. They must be accompanied by adults to avoid accidents. 5). In a strong electromagnetic interference environment, the product may not work properly. At this time, it is necessary to stay away from the interference source before normal use. 6). If a product has an abnormality during the first use or use, please charge the product and reset the product once so that it can be used normally.
FAQ
Q1: Are you a manufacturer or trading company?
A1: Mingle Development (Shenzhen) Co., Ltd, is a manufacturing company established in 1992, covering an area of over 25,000m2/269,098ft2 and over hundreds of employees, with expertise in product research and development, OEM, ODM & OBM service.
Q2: Do you have any factory audits?
A2: Yes, we have BSCI, GSV, ISO 9001, GSV,QS Certification etc.
Q3: Do you have any certifications?
A3: Yes, we have CE, FCC, RoHS, Reach, NSF, LFGB, WEEE, DGCCRF etc.
Q4: What is your MOQ?
A4.1: In stock: No MOQ
A4.2: No stock or OEM: MOQ is 100pcs on your initial order at a slightly higher price. Subsequent orders need to comply with our MOQ requirements, however, it’s negotiable at certain circumstances. Please contact our customer service for further details.
Q5: What is your sample lead time and production lead time?
A5.1: In stock sample lead time: 1-2 days
A5.2: Sample production (after receiving the sample production fee): 7-10 days
A5.3: Product lead time: 35-45 days depending on your MOQ.
Q6: What are your payment terms?
A6: 30/70 TT – 30% down payment (deposit) on placement of the order, with the remaining 70% due upon shipment.
Q7: What are your delivery terms?
A7: FOB, CIF, Air Freight are available. Contact our customer services for further details.
A1: Mingle Development (Shenzhen) Co., Ltd, is a manufacturing company established in 1992, covering an area of over 25,000m2/269,098ft2 and over hundreds of employees, with expertise in product research and development, OEM, ODM & OBM service.
Q2: Do you have any factory audits?
A2: Yes, we have BSCI, GSV, ISO 9001, GSV,QS Certification etc.
Q3: Do you have any certifications?
A3: Yes, we have CE, FCC, RoHS, Reach, NSF, LFGB, WEEE, DGCCRF etc.
Q4: What is your MOQ?
A4.1: In stock: No MOQ
A4.2: No stock or OEM: MOQ is 100pcs on your initial order at a slightly higher price. Subsequent orders need to comply with our MOQ requirements, however, it’s negotiable at certain circumstances. Please contact our customer service for further details.
Q5: What is your sample lead time and production lead time?
A5.1: In stock sample lead time: 1-2 days
A5.2: Sample production (after receiving the sample production fee): 7-10 days
A5.3: Product lead time: 35-45 days depending on your MOQ.
Q6: What are your payment terms?
A6: 30/70 TT – 30% down payment (deposit) on placement of the order, with the remaining 70% due upon shipment.
Q7: What are your delivery terms?
A7: FOB, CIF, Air Freight are available. Contact our customer services for further details.
Q8: What can you supply? Are OEM and ODM available?
A8: We can supply custom Oven Thermometer, Mingle Thermometer, Meat Thermometer and so on.
As a professional Mingle Thermometer manufacturer, we offer OEM and ODM service.
Q9: What is your quality control process?
A9: Mingle has a comprehensive quality management system based upon strict quality assurance that is carried out in accordance with ISO 9001. We do IQC, IPQC, FQC & OQC.
Q10: What services do you provide?
A10: We provide OEM, ODM, OBM and product turnkey solutions as per client’s specifications and needs.
Q11: Do you provide Dropshipping?
A11: Yes, we provide dropshipping and warehousing. We can even provide you with images and descriptions of our products so you just need to focus on sales. For further information please contact our customer service.
Q12: Do you provide warehousing services?
A12: Yes, we provide FREE warehousing for 2 months.
Q13: Do you have any affiliate, referral or other programs?
A13: Yes, earn commission on all referred sales just by referring customers to Mingle.
A8: We can supply custom Oven Thermometer, Mingle Thermometer, Meat Thermometer and so on.
As a professional Mingle Thermometer manufacturer, we offer OEM and ODM service.
Q9: What is your quality control process?
A9: Mingle has a comprehensive quality management system based upon strict quality assurance that is carried out in accordance with ISO 9001. We do IQC, IPQC, FQC & OQC.
Q10: What services do you provide?
A10: We provide OEM, ODM, OBM and product turnkey solutions as per client’s specifications and needs.
Q11: Do you provide Dropshipping?
A11: Yes, we provide dropshipping and warehousing. We can even provide you with images and descriptions of our products so you just need to focus on sales. For further information please contact our customer service.
Q12: Do you provide warehousing services?
A12: Yes, we provide FREE warehousing for 2 months.
Q13: Do you have any affiliate, referral or other programs?
A13: Yes, earn commission on all referred sales just by referring customers to Mingle.